ESD Wrist Strap & Footwear Combo Tester Quick
ESD Wrist Strap & Footwear Combo Tester Quick Brand
Features
- Has 2 Test Modes:
- Single Test Mode: Checks the ESD status of Wrist Strap or Footwear.
- Comprehensive Test Mode: Checks the ESD Status of both Wrist Strap and Footwear. - You can connect it to his Door Control System thru Access System Control Signal from this Tester.
- Wrist Strap & Footwear Combo Tester uses micro-current testing for stable and accurate results.
- Low Voltage Alarm Function: when the battery goes low in this Tester, there will be alarm indication.
Specification
- Power supply : 9V Battery
- Touch-Point : Voltage ≤ 400V (peak, DC or AC)
- Switching Output :
- Switch Current ≤ 130 mA
- Touch-Point Resistance of < 30Ω
- Touch-Point Close
- Test FAIL : Touch-point open - Accuracy :
- Wrist Strap testing: ± 10%
- Footwear testing: ± 10% ( KΩ)
- ± 20% (100 MΩ), ± 30% (1 GΩ) - Access Control Signal Output : ±400V (Peak DC/AC); 100mA (Recommended Relay KAQW214)
- Dimensions (approx) : 160 mm x 100 mm x 40 mm
- Weight (approx) : 0.6 kg (Test Unit Only)
Used by many MNCs in repeat orders and it is ANSI ESD S20.20 Compliant
Top-of-the-line Combo Wrist Strap Tester & Footwear ESD Tester Model 492E can be connected to Door Control System thru Access Control System Signal from this Tester. It gives signal of ±400V (Peak DC/AC); 100mA to operate relay (KAQW214) of Access Control System.
Following are the test result indications:
